Infrared Measurement Division - General Articles
2021
Thermomechanical modeling of the metallic rivet in friction riveting of amorphous thermoplasticsThermomechanical modeling of the metallic rivet in friction riveting of amorphous thermoplastics,Pedro Vilaça et al., Aalto University (2021-01-21; English)
Apple Sunburn Risk Detection—A Simple Model for Agricultural Decision Making and Some Fruit Temperature Measurements, Klaus-Peter Wittich, DWD-ZAMF Braunschweig (2021-02-04; English)
Influence of Process Conditions on the Local Solidification and Microstructure During Laser Metal Deposition of an Intermetallic TiAl Alloy (GE4822), Silja-Katharina Rittinghaus, Silja-Katharina Rittinghaus, Jonas Zielinski, Bergische Universität Wuppertal (2021-02-04; English)
Spatiotemporal Investigation of the Temperature and Structure of a Pt/CeO2 Oxidation Catalyst for CO and Hydrocarbon Oxidation during Pulse Activation, Florian Maurer et al., Karlsruhe Institute of Technology (2021-03-01; English)
Understanding the abnormal thermal behavior of nanofluids through infrared thermography and thermo-physical characterization, Adela Svobodova et al., University of Barcelona (2021-03-01; English)
Flowering phenology in alpine grassland strongly responds to shifts in snowmelt but weakly to summer drought, Ansgar Kahmen et al., University of Basel (2021-04-05; English)
Laminar-Turbulent Transition Localization in Thermographic Flow Visualization by Means of Principal Component Analysis, Daniel Gleichauf et al., University of Bremen (2021-06-12; English)
Use of Different Process Gases for Manufacturing Isolating Alumina Coatings by Flame Spraying with Cords, Michél Hauer et al., Fraunhofer Institute for Large Structures in Production Engineering IGP (2021-06-15; English)
Hygro-thermo-mechanical performance of wheelchair cushion technologies in the prevention of pressure ulcers and moisture-associated skin damages, Fabien Bogard et al., University of Reims Champagne Ardenne (2021-07-21; English)
Azobenzene-dyed, nanofibrous microstructure for improving photothermal effect of polymer gel electrolyte, Yifu Huang et al., Shantou University (2021-10-12; English)
Medical Infrared Thermography in Odontogenic Facial Cellulitis as a Clinical Decision Support Tool. A Technical Note, Stéphane Derruau et al., Université de Reims Champagne-Ardenne (2021-11-04; English)
2020
Piezoelectric Response of Polycrystalline Silicon-Doped Hafnium Oxide Thin Films Determined by Rapid Temperature Cycles, Clemens Mart et al., Infineon Technologies (0202-01-29; English)
Case study: Near real-time thermal mapping to support firefighting and crisis management, Tilman Bucher et al., German Aerospace Center (DLR) (2020-01-01; English)
In-Situ Defect Detection in Laser Powder Bed Fusion by Using Thermography and Optical Tomography—Comparison to Computed Tomography, Gunther Mohr et al., Technische Universität Berlin (2020-01-09; English)
Quantification of Delaminations in Semitransparent Solids Using Pulsed Thermography and Mathematical 1D Models, R. Bernegger et al., Bundesanstalt für Materialforschung und -prüfung (BAM) (2020-03-17; English)
Stable honeycomb structures and temperature based trajectory optimization for wire-arc additive manufacturing, Martin Bähr et al., Brandenburg University of Technology Cottbus - Senftenberg (2020-09-14; English)
In-situ monitoring of a laser metal deposition (LMD) process: comparison of MWIR, SWIR and high-speed NIR thermography, Simon J. Altenburg et al., Bundesanstalt Für Materialforschung Und -prüfung (BAM) (2020-11-04; English)
Experimental Determination of the Emissivity of Powder Layers and Bulk Material in Laser Powder Bed Fusion Using Infrared Thermography and Thermocouples, Gunther Mohr et al., Bundesanstalt für Materialforschung und Prüfung (BAM) (2020-11-20; English)
Characterization of SRM plumes with alumina particulate in subscale testing, Dominik Saile et al., German Aerospace Center (DLR) (2020-12-23; English)
Preliminary study on the effect of sex on skin cooling response during whole body cryostimulation (−110 °C): Modeling and prediction of exposure durations, G. Polidori et al., University of Reims Champagne Ardenne (2020-12-28; English)
In-situ monitoring and detection of spatter agglomeration and delamination during laser-based powder bed fusion of Invar 36, Mostafa Yakout et al., McMaster University (2020-12-31; English)
2019
Propagation of a hemispherical flame over a heat-absorbing surface, V. Golub et al., Joint Institute for High Temperatures Moscow (2019-01-25; English)
Induction-based joining of titanium with thermoplastics, Florian Lugauer et al., Munich University of Applied Sciences (2019-02-14; English)
Successful automatic landing with vision assisted navigation - "Eyes" for the autopilot, Martin Kügler, Stephan Wolkow, Technical University of Munich (TUM) (2019-04-07; English)
Optimizing thermographic testing of thick GFRP plates by assessing the real energy absorbed within the material, Jan P. Müller, Rainer Krankenhagen, Bundesanstalt für Materialforschung und -prüfung (BAM) Berlin (2019-05-01; English)
Comparison and Combination of Thermal, Fluorescence, and Hyperspectral Imaging for Monitoring Fusarium Head Blight of Wheat on Spikelet Scale, Anne-Katrin Mahlein et al., Rheinische Friedrich-Wilhelms Universität Bonn (2019-05-17; English)
Direct Measurement of the In-Plane Thermal Diffusivity of Semitransparent Thin Films by Lock-In Thermography: An Extension of the Slopes Method, Alexandra Philipp et al., University of Bayreuth (2019-05-31; English)
Verfahrensentwicklung für die Prozessüberwachung in der additiven Fertigung von Metallen - Thermografie, Nils Scheuschner et al., Federal Institute for Materials Research and Testing (BAM) (2019-08-01; German)
Infrared thermal imaging as a non-destructive investigation method for building archaeological purposes, Anna Luib, University of Bamberg (English, 2019-08-01; English)
In situ reactor to image catalysts at work in three-dimensions by Bragg coherent X-ray diffraction, Amélie Rochet et al., Center for Research in Energy and Materials (CNPEM) (2019-08-12; English)
Health status detection of neonates using infrared thermography and deep convolutional neural networks, Ahmet Haydar Ornek et al., Konya Technical University (2019-10-23; English)
Single-phase friction riveting: metallic rivet deformation, temperature evolution, and joint mechanical performance, Jorge F. dos Santos et al., Helmholtz-Zentrum Hereon (2019-11-01; English)
2018
Evaluation of the Thermo-Elastic Behavior of a High-alloyed Steel by Fourier Transformation based Lock-In-Thermography; R. Urbanek, J. Bär; Institute of Materials Science, University of the Bundeswehr (2018-01-01; English)
A Pilot Study Into the Utility of Dynamic Infrared Thermography for Measuring Body Surface Temperature Changes During Treadmill Exercise in Horses, Maria Soroko et al., Wroclaw University of Environmental and Life Sciences (2018-01-09; English)
Assessment of Saddle Fit in Racehorses Using Infrared Thermography, Maria Soroko et al., Wroclaw University of Environmental and Life Sciences (2018-02-03; English)
Plasticized and reinforced poly(methyl methacrylate) obtained by a dissolution-dispersion process for single point incremental forming, S.L. Clavijo-Chaparro et al., Escuela de Ingeniería y Ciencias (2018-03-31; English)
Measurement uncertainty of IR thermographic flow visualization measurements for transition detection on wind turbines in operation, C. Dollinger et al., University of Bremen (2018-05-04; English)
Monitoring of Cardiorespiratory Signals Using Thermal Imaging: A Pilot Study on Healthy Human Subjects, Carina Barbosa Pereira et al., RWTH Aachen University (2018-05-13; English)
Dynamics of dust events in the graphite first wall equipped SST-1 tokamak, Santanu Banerjee et al., Institute for Plasma Research Gandhinagar (2018-06-01; English)
Passive impulse thermography during quasi-static tensile tests of fiber reinforced composites, Vitalij Popow et al., Institut für Verbundwerkstoffe GmbH (2018-06-11; English)
High-speed recording of thermal load during lasertrans-epithelial corneal refractive surgery using a750 Hz ablation system, Diego De Ortueta et al., AureliosAugenzentrumRecklinghausen (2018-06-20; English)
Dynamics of dust events in the graphite Plasmaphysics, Santanu Banerjee et al., Institute for Plasma Research Gandhinagar (2018-06-29; English)
Noncontact Monitoring of Respiratory Rate in Newborn Infants Using Thermal Imaging, Carina Barbosa Pereira et al., RWTH Aachen University (2018-08-23; English)
The effect of thermal insulation pads on heat flux, physical effort and perceived exertion during endurance exercise in cool environments, Sebastian Wenger et al., University of Innsbruck (2018-09-05; English)
Thermal performance of a solar high temperature thermochemical reactor power by a solar simulator, Tingting Ma et al., Changzhou University (2018-10-09; English)
Thermometry of intermediate level waste containers using phosphor thermometry and thermal imaging, J.L. McMillan et al., National Physical Laboratory Teddington (2018-10-21; English)
Lanthanide-doped glasses as frequency-converter for high-power LED applications, Stefan Schweizer et al., South Westphalia University of Applied Sciences (2018-11-24; English)
Plasticity induced heating – an underestimated effect in monotonic and cyclic deformation, Jürgen Bär, University of the Bundeswehr (2018-12-31; English)
Dissociation Between Brown Adipose Tissue (18)F-FDG Uptake and Thermogenesis in Uncoupling Protein 1-Deficient Mice, Mohammed K Hankir et al., University of Zurich (2017-01-12; English)
Brilliant Down to the Smallest Detail, InfraTec GmbH (2017-02-01; English)
Order for Industrial Thermography Cameras, InfraTec GmbH (2017-04-01; English)
Induced Infrared Thermography: Flow visualizations under the extreme conditions of an open volumetric receiver of a solar tower, Arne Tiddens et al., German Aerospace Center (DLR) (2017-04-14; English)
Metallurgical and mechanical properties of continuous drive friction welded copper/alumina dissimilar joints, Peng Li et al., Dalian University of Technology (2017-06-08; English)
A numerical approach for investigating thermal contact conductance, Y. Frekers et al., RWTH Aachen University (2017-07-14; English)
Thermografie mit optimierter Anregung für die quantitative Untersuchung von Delaminationen in kohlenstofffaserverstärkten Kunststoffen, Jan P. Müller et al., Bundesanstalt für Materialforschung und -prüfung Berlin (2017-08-01; German)
Results of high heat flux qualification tests of W monoblock components for WEST, H. Greuner et al., Max-Planck-Institut für Plasmaphysik (2017-08-25; English)
Cylindrical plunge grinding of twist free surfaces by structured wheels, Amir Daneshi et al., Furtwangen University of Applied Sciences (2017-10-07; English)
Influence of a heat-absorbing surface on the propagation of a hemispherical flame, V. Golub et al., Joint Institute for High Temperatures Moscow (2017-11-22; English)
IR thermographic visualization of flow separation in applications with low thermal contrast, C. Dollinger et al., University of Bremen (2017-12-07; English)
Infrared Thermography for Monitoring of Freeze-Drying Processes: Instrumental Developments and Preliminary Results, Håkan Emteborg et al., Institute for Reference Materials and Measurements (IRMM) (2016-01-03; English)
Computational design of a heated PMMA window validated by infrared thermography, Stefan Kolling et al., Technische Hochschule Mittelhessen (2016-02-03; English)
Thermal shock behaviour of laminated multilayer refractories for steel casting applications reinforced by residual stresses, Daniel Jakobsen et al., University of Erlangen-Nuremberg (2016-06-25; English)
A reference-free micro defect visualization using pulse laser scanning thermography and image processing, Jinyeol Yang et al., Samsung Electronics, Asan (2016-07-07; English)
Influence of different zinc coatings on laser brazing of galvanized steel, Wilfried Reimann et al., Volkswagen AG (2016-08-18; English)
Technical design note: differential infrared thermography of methane jets, Hendrik Golzke et al., Robert Bosch GmbH (2016-10-01; English)
Estimation of breathing rate in thermal imaging videos: a pilot study on healthy human subjects, Carina Barbosa Pereira et al, RWTH Aachen University (2016-10-24; English)
Non-destructive inspection of aircraft composite materials using triple IR imaging, S. Moustakidis et al., City University of London (2016-12-16; English)
2015
Structural design of flexible Au electrode to enable shape memory polymer for electrical actuation, Haibao Lu et al., Harbin Institute of Technology (2015-02-27; English)
FORCE CONTROLLED FRICTION RIVETING OF GLASS FIBER REINFORCED POLYAMIDE 6 AND ALUMINUM ALLOY 6056 HYBRID JOINTS, Bruno C Proenca et al., Helmholtz-Zentrum Hereon (2015-03-01; English)
Transiente Methoden der Infrarot-Thermografie zur zerstörungsfreien Fehleranalytik in der mikroelektronischen Aufbau- und Verbindungstechnik; M. Eng. Daniel May, Technische Universität Chemnitz (2015-03-24; German)
Correlation of internal and surface temperatures during laser cutting of epoxy-based carbon fibre reinforced plastics, Sven Bluemel et al., Laser Zentrum Hannover e.V. (2015-05-24; English)
Autonomous Robotic System for Thermographic Detection of Defects in upper Layers of Carbon Fiber Reinforced Polymers, Morris Antonello et al., University of Padova (2015-08-01; English)
Determination of time-dependent thermal contact conductance through IR-thermography, E.M. Burghold et al., RWTH Aachen University (2015-08-04; English)
The influence of the composite features on the mechanical performance of hybrid thermoset composite-metal friction-riveted joints, Natascha Zocoller Borba et al., Helmholtz-Zentrum Geesthacht GmbH (2015-09-01; English)
FricRiveting of aluminum 2024-T351 and polycarbonate: Temperature evolution, microstructure and mechanical performance, C.F. Rodrigues et al., Helmholtz-Zentrum Geesthacht (2014-01-09; English)
Thermal imaging reveals massive heat accumulation in flowers across a broad spectrum of alpine taxa, Lars Dietrich, Christian Körner, University of Basel (2014-01-28; English)
Thermal canopy photography in forestry - an alternative to optical cover photography, N. Nölke et al., Georg-August-University Göttingen (2014-03-13; English)
Friction riveting of pultruded thermoset glass fiber reinforced polyester composite and TI6AL4V hybrid joints, Natascha Zocoller Borba et al., Helmholtz-Zentrum Hereon (2014-04-01; English)
Quantum cascade laser-based hyperspectral imaging of biological tissue, Niels Kröger et al., University of Heidelberg (2014-06-26; English)
Dynamic buckling behavior of thin metal film lines from substrate, Dan Wu et al., Tsinghua University Beijing (2014-09-10; English)
Thermography IR applied to analyse the influence of the deformation speed in the forming process, Manuel San Juan Blanco et al., Universidad de Valladolid (2014-09-10; English)
Temperature gradients in microelectrode measurements: Relevance and solutions for studies of SOFC electrode materials, T.M. Huber et al., Vienna University of Technology (2014-10-22; English)
Self-healing epoxy with ultrafast and heat-resistant healing system processable at elevated temperature, Xiao Ji Ye et al., Sun Yat-Sen University (2014-11-19; English)
Review of thermal imaging systems in composite defect detection, I. Jorge Aldave et al., Centro de Tecnologías Aeronáuticas (CTA) (2013-08-06; English)
Mobile speckle interferometer in the long-wave infrared for aeronautical nondestructive testing in field conditions, Jean-François Vandenrijt et al., University of Liège (2013-10-01; English)
Approach to the Study of Workpiece Damage in Drilling of Carbon Fiber Composites by Using Thermography IR, Manuel San Juan Blanco et al., Universidad de Valladolid (2012-04-01; English)
Combustion synthesis of Ni/Al base composites, Xiaomeng Zhu et al., Wuhan University of Technology (2012-06-01; English)
Nondestructive testing by using long-wave infrared interferometric techniques with CO2 lasers and microbolometer arrays, Igor Alexeenko et al., Immanuel Kant Baltic Federal University (2012-10-01; English)
Automated jitter correction for IR image processing to assess the quality of W7-X high heat flux components, H. Greuner et al., Max Planck Institute for Plasma Physics (2009-04-01; English)