ImageIR® 4300
The entry door to spectral thermography
Motorized remotly controlled filter wheel for spectral thermography includable
Seperatable filter and aperture wheels can allow for highest flexibility
High thermal resolution for precision measurements
Modular design for application specific configuration and successive adaption to increasing needs
Large detector enables highest sensivity
Analysis of extreme temperature changes and gradients in full frame
Highly accurate and repeatable measurements
Precise detection of smallest temperature differences
Accurate temperature measurements of fast processes
Precise measurement of low temperatures and very fast integration times
Standard interface for easy integration into existing process environment
Measure Precisely over a Long Time
A high long-term stability of the thermographic measurement with infrared camera systems of the ImageIR® 4300 series is achieved by an excellent thermal decoupling of the electronics module which will emit heat during its operation from the optical and detector module being most important for the signal receipt.
Focus the Thermal Radiation Loss-free with Quality Lenses
In the field of thermography, low temperatures result in lower infrared radiation and thereby in smaller signal for the infrared camera. That is why all the available signal should be used. The lens is the part of the infrared camera getting in touch with the infrared radiation at first and therefore it plays an important role. Precision lenses being coated with an anti-reflection film for avoiding disturbtions take care that the whole infrared radiation will be focussed to the detector of the of the ImageIR® 4300 series. Within this series of infrared camera systems, a wide range of lenses - starting with telephoto lenses up to microscopic lenses – can be found, too.
Solid Immersion Lens (SIL) for ImageIR®
In order to make particularly small structures clearly visible, an infrared camera with a large detector format is suitable. In some cases, special measurement and testing tasks require a further increase in spatial resolution. In the field of micro-thermography, high-performance infrared microscopic lenses are used for this purpose. Their benefits can be further increased in conjunction with Solid Immersion Lenses (SIL). Mounted on the optics, these immersion media significantly improve the resolution of even the smallest structures in the µm range.
Make Use of Spectral Filters for Material Specific Measurements
Material specific emissivity and transmissivity properties have to be taken into account while measuring with infrared camera systems. The integration of spectral filters makes use of those specifics for special measurements. For example, spectral ranges of thin PE foils can be excluded in case they are highly transmissive – to say transparent. Like this only the radiation will be measured which is purely emitted by the foil itself. Based on its long experience in thermography InfraTec can support you in selecting the right spectral filter. The infrared camera systems of the ImageIR® series can integrate a remotely controllable filter wheel which can hold up to four spectral filters. The filter position close to the detector can avoid warm aperture effects and allows for the usage of smaller and thereby cheaper filters in the infrared camera.
Extend Your Temperature Measurement Range with an Automatic Aperture Setting
The temperature measurement range of the ImageIR® infrared camera series can be widened by an integrated aperture wheel. The motorized aperture wheel can be controlled by the camera control itself. Working with calibrated measurement ranges the appropriate aperture will even be automatically set in the infrared camera. When filter and aperture wheels are separately integrated ImageIR® camera series will be especially flexible in handling specific measurement situations.
Easily Transfer Your Radiometric Data to the Computer
You will be able to work with both radiation proportional data formats and also directly with temperature data in °C or °F. You will receive the data by setting your specific parameters in the easy handling acquisition interface of the ImageIR® series at a frame rate of up to 2.5 kHz.
Detect Smallest Temperature Differences Using High Thermal Resolution of 20 mK
The thermal resolution of the ImageIR® infrared camera series allows you to measure smallest temperature differences of (at 30 °C). Thermal images with a narrow temperature span display details absolutely sharp. You will find interesting signatures even there where other infrared camera systems cannot detect any temperature differences any longer.
Increase Your Flexibility by Using the Modular Design Concept
The ImageIR® series is based on a modular concept and allows for successive upgrading and changes of powerful components like motorized lenses or a high-speed shutter. Already in its basic configuration it can be delivered with different detectors which support your application the best way. Like this you will always remain flexible and optimally adapt your camera systems to your respective needs.
Technical Specifications of ImageIR® 4300 Series
| Spectral range | (3.7 … 4.8) µm |
| Pitch | 30 µm |
| Detector | MCT |
| Detector format (IR pixels) | (320 x 256) |
| Image recording principle | Snapshot |
| Readout mode | ITR |
| Aperture ratio | f/2.0 |
| Detector cooling | Stirling cooler |
| Temperature measuring range | (-40 ... 300) °C, up to 3,000 °C* |
| Measurement accuracy | ± 2 °C or ± 2 % |
| Temperature resolution at 30 °C | Better than 0.02 K |
| Frame rate | Up to 75 / 265 / 706 Hz |
| Window mode | Yes* (full frame / sub frame) |
* Depending on model
** In selected measurement ranges
Configure Your Camera System
Each measurement or testing task has its own characteristic basic conditions. For getting optimal results camera, detector and lens have to be perfectly matched to one another. The field of view calculator helps you to determine the appropriate combination.
Comprehensive Thermography Evaluation Software for Efficient Operation
The software family IRBIS® 3, which was developed by InfraTec, is part of a complete system of the camera series ImageIR®. The comfortable and professional thermography software IRBIS® 3 professional offers a wide range of analysis- and editing tools to analyse sophisticated thermal investigations. The combination of ImageIR® together with the professional thermographic software meets all requirements that are set as standard for efficient high-performance tools for thermographic investigations.
Product Flyer
Get all the information you need at a glance in our product flyers
Do You Want to Know More About the InfraTec Service?
Our experienced service team will be happy to assist you.
Choose Your Infrared Camera
Choose from more than 30 infrared camera models. Our product range includes includes compact and system cameras, high-end systems as well as zoom cameras and OEM solutions.
